—
Products
PRODUCTS
Tajikistan Multi-layer melamine board veneer hot press
Product Description
Product Name:Multilayer Melamine Board Veneer Hot Press
1.Function introduction:
This machine adopts the gantry design and is welded with high-quality steel.The force point is strictly calculated,and the stability is high without deformation;the hydraulic system is a fast closing pump station with reasonable structure,low failure rate,large flow,rapid pressurization,and improved production effectiveness.The operation is simple,the performance is reliable,the steam pipeline is double-in and double-out,and the temperature and time are automatically controlled to ensure the uniform temperature of the hot plate.This machine is widely used in decorative veneers such as plywood,blockboard,and melamine veneer.
2.Specifications:
Equipment model technical parameters:BY214×8/6-10IId
Nominal pressure:6000 KN
Into the board direction:horizontal
Number of floors:10 floors
Layer spacing:100㎜
Number of hot pressing plates:11
Format size:1400×2700×52㎜(double in and double out)
Number of plunger cylinders:6
Diameter:Φ220㎜(Shanghai)
Stroke:1000㎜
Withstand voltage:≤25 Mpa
No-load closing time:about 17 S
Low pressure pump flow rate:355LX3/min
Allowable pressure:≤5 Mpa
Power:15KWX3
High pressure pump flow rate:about 89L/min
Power:15 KW
unit slab pressure:20 Kgf/㎝2
Slab size:1240×2460㎜
Machine quality:about 40,000 Kg
Dimensions:3590×1400×4070㎜
Control method:automatic pump station
The thickness of the upper and lower beams:900，1000㎜
The thickness of the steel plate used:30,25,16㎜
The column adopts steel plate:30,16㎜
The thickness of the movable beam:400㎜
The thickness of the steel plate used:30,20㎜